Forging
Overview
Forged parts, rolled components and rings made of copper and copper alloys according to national and international standards, as well as according to customer-specific standards
Production Overview
- Foundry
- Drop Forging
- Testing & Analysis
- Heat Treatment
- Hydraulic Forging Press
- Mechanical Properties Testing
- NDT - PT, UT, VT
- Ring Mill
- Mechanical Machining
| Dimensions (Not always possible in combination) |
|
| Round Bar | |
| Diameter | ∅ 28 - 450 mm |
| Length | max. 12000 mm |
| Square | |
| Lateral Length | max. 400 mm |
| Length | max. 4000 mm |
| Rectangle | |
| Width | max. 1100 mm |
| Height | min. 20 mm |
| length | max. 1500 mm |
| Bush | |
| Outer Diameter | max. 550 mm |
| Wall Thickness | min. 35 mm |
| Length | max. 1500 mm |
| Ring | |
| Outer Diameter | max. 550 mm ∅ On request up to 2500 mm |
| Height | max. 750 mm |
| Weight | max. 3,000 kg |
| Disc | |
| Outer Diameter | max. 1600 mm |
| Weight | max. 3,000 kg |
| Drop Forged Part | |
| max. 20 kg | |
| Alloys (exemplary) |
|||||
| Zoller | BS, Other | DEF-STAN; EN | ASTM | ||
| Cu | |||||
| OF-Cu | C110 | CW009A | C10100 | ||
| SE-Cu | C103 | CW021A | C10300 | ||
| CuCr1Zr CuCr1 |
|||||
| CCZr | CC102 | CW106C | C18150 | ||
| CC Zr 04 | - | CW105C | C18200 | ||
| Cu-Al | |||||
| EBZ-DGS | CA104 | 02-833 / 02-879 | - | ||
| C63000 | - | - | C63000 | ||
| C63200 | - | - | C63200 | ||
| C63200 | - | - | C63200 | ||
| EBZ-HF | BS2B23 | CW307C | - | ||
| CuZn | |||||
| CuZn39Sn1 | CZ112 | CW719R | C46400 | ||
| CuNi | |||||
| NB 10 | CN102 | 02-779 / 02-879 | C70600 | ||
| NB 30 | CN107 | 02-780 / 02-879 | C71500 | ||
| NB 1 | 2.1504 | - | - | ||
| NB S | - | 02-835 | C72420 | ||
| CuNiSi | |||||
| CuNi2Si | - | CW111C | C18000 C64700 |
||
| NSB 5 | BS3B 25 D.T.D 197 A |
- | - | ||
| Standards: EN 12420, ASTM, BS, DEF STAN, WL | |||||